Foam spray Soudafoam FR, Fire rated expanding foam, , is a single-component, self- expanding, ready-to-use polyurethane foam which is a top-rated product in McCoy Soudal’s arsenal. It boasts of a fire rating of up to 120 minutes in specific configurations, as per the standards set by Aust Standard AS1530.4-2005 and EN 1366-4. Avaialble at very competitive price for online purchase.
Fire-resistant properties allows it to resist fire for up to 4 hours
Cured sealant is excellent for preventing the passage of smoke and gas
High thermal and acoustic insulation; desirable for applications in heat and sound-intensive areas
Excellent stability (no shrinkage or post-expansion)
Meets all the standards as per Aust Standard AS1530.4-2005
Offers excellent adhesion to all surfaces (except PE, PP and PTFE)
Applications Foam Spray Soudafoam FR
Installation of fireproof doors and windows
Sealing of openings in roof constructions
Sealing fire and smoke between walls, floors & ceilings
Applications requiring a sound-absorbing layer for lesser noise within the rooms
Using foam spray Soudafoam FR
- Clean the application area with water spray.
- Moisten the area using the same water spray. Foam sealant adheres to substrates that are clean and free of dust and grease.
3. Surface must be dampened enough to ensure that the Foam sealant finds adequate moisture for its hardening process.
4. Attach the gun on the spray can, hold the gun such that the can is upside down .
5. Adjust the knob at the end of gun to control dispensing speed/ quantity. Press gun trigger for application.
6. Keep shaking the can.
7. Gun mounted can be used and stored for a day or two , provided the tip of gun is sealed from moisture – using grease etc.
8. The foam cures in 30- 40 minutes depending upon weather conditions.
9. After curing, extra foam can be cut with a sharp knife.
10. PU foam sealant is paintable. However, it is not UV resistant – should not be exposed to direct sunlight. If unavoidable – paint the foam to protect from sunlight.
11. After emptying the can , mount the PU cleaner – press till entire foam is extruded from the gun and the gun is free from foam .
12. Gun and cleaner can be removed and stored till next usage.Mccoy Soudal.